Y-type filter Intallation
Sep 03 , 2021
Installation skills of Y-type filter
Y-type filter is an indispensable device in the pipeline conveying medium. It is installed at the inlet end of pressure reducing valve, pressure relief valve, constant water level valve or other equipment. It is a small equipment used to remove a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a certain specification filter screen, its impurities are blocked, The clean filtrate is discharged from the filter outlet. When cleaning is needed, just take out the detachable filter cartridge and reload it after treatment. Therefore, it is very convenient for use and maintenance.
Characteristics of Y-type filter:
1. Y-shaped, full and wide valve body streamline design, large filtering area and large flow.
2. Simple installation and maintenance, convenient cleaning of filter screen.
3. The internal and external surfaces are sprayed with environmental protection coating to ensure the corrosion prevention and safety of the product.
Y-type filter is mainly composed of connecting pipe, main pipe, filter screen, flange, flange cover and fasteners. When the liquid enters the filter basket through the main pipe, the solid impurity particles are blocked in the filter basket, and the clean fluid is discharged from the filter outlet through the filter basket.
Installation direction of Y-type filter:
1.Steam or gas pipeline: the filter screen faces the horizontal direction;
2.Liquid pipeline: the filter screen is installed downward;
3.Vertical installation: according to the filter installation direction.
Precautions for installation of Y-type filter:
1. The installation of Y-type filter shall be carried out according to the flow direction, recommended installation method and installation requirements shown in the product samples and installation instructions provided by the manufacturer.
2. The upstream and downstream of Y-type filter can be equipped with differential pressure gauge or pressure gauge according to the needs of process production to judge the blockage, and the back blowing and cleaning pipeline shall be configured according to the needs of process.
3. The convenience of Y-type installation and removal shall be considered when piping.
4. Requirements of pipeline filter on pipeline design.
5. The pipeline equipped with Y-type filter can be divided into intermittent operation and continuous operation.
During intermittent operation, a shut-off valve shall be set in front of and behind the Y-type filter to clean the filter.
During continuous operation, two sets of filters in parallel shall be set for the filter, and shut-off valves shall be set at the front and rear of the filter (except for wire gap filter).
The above is a detailed description of the installation direction of Y-type filter. In addition, it is necessary to select a suitable environment during installation, so that Y-type filter can better play its role and ensure the cleanness of medium in the system
IPv6 network supported 